Tractor · 41–50 HP

Massey Ferguson 254 DYNATRACK 2WD Price October 2026

Massey Ferguson 254 DYNATRACK 2WD
Price on requestex-showroom
50 HPEngine HP
2,700 ccEngine capacity

MF 254 DYNATRACK 2WD moves this family into the 50 HP category while retaining a 2700 cc three-cylinder engine and 12F+12R transmission. A buyer comparing it with the 46 HP 246 should ask where the additional rating is useful, rather than assuming that every other capacity rises with it.

Separate the power upgrade from hydraulic capacity

The Indian 254 page lists 2050 kgf hydraulic lift, while the 246 page also lists 2050 kgf with a specified lower-link position. Neither figure is permission to fit a heavier implement because the engine badge has changed. Ask the implement supplier to confirm power, loaded weight, centre of gravity and hitch requirements for each candidate.

If a rotavator is the intended purchase, record its exact model and operating conditions. A general 50 HP label does not approve every machine of the same nominal width. Request the applicable PTO power rating rather than deriving it from engine horsepower. Quadra PTO is listed at 540 rpm from 1789 engine rpm; confirm the installed modes in the manual.

Compare working controls on the 2WD configuration

Power steering, SuperShuttle, a spool valve and telescopic stabilizer are listed. Test whether the operator can use the required controls comfortably and ask the supplier to match the external hydraulic connection to the attachment. A valve being present does not establish the flow and connection required by every hydraulic implement.

Two wheelbase figures,1935 and 2035 mm, appear on the official page. Record the setting supplied and request its approved configuration instructions. Do not combine a dimension from one setting with a handling claim from another. This record covers 2WD; keep the separate 4WD front axle, tyres and quote out of the comparison.

Buy the requirement that the smaller candidate cannot meet

If both candidates complete the approved job at an acceptable rate, compare their complete written prices and local support. If the 254 is needed, state the requirement that justifies it. The PTO guide can help prevent shaft speed from being mistaken for available power. Obtain the service schedule for the delivered transmission and hydraulic system; no field-output or fuel-saving percentage is assumed here.

Indicative price in India

TractorKarvan, checked on 4 October 2026, lists ₹7.53–9.02 lakh ex-showroom for this named version. Treat this as an indicative India-wide market range, not a manufacturer quote or a confirmed price for your district and chosen options. Ask a local dealer for the exact equipment list and separate applicable registration, insurance, delivery and other charges in the on-road total.

Source and scope

Official Indian model specifications, checked on 4 October 2026. TAFE advises confirming current specifications and regional availability with an authorised representative. The practical assessment here is buying guidance, not a field test.

Aglist Score: 6.8/10 — Good

6.8/10
Good
Power & performance 3.0
Build & durability 9.3
Comfort & usability 8.1
Warranty & service reach 8.5

How we score →

Our verdict: Massey Ferguson 254 DYNATRACK 2WD

Verdict by the Aglist editorial desk

Select the 254 DYNATRACK when its verified power and control package meets a requirement the alternative does not. The 50 HP badge does not by itself increase approved implement mass or prove faster fieldwork.

Massey Ferguson 254 DYNATRACK 2WD — What works / What to watch

What works

  • Power steering listed
  • 12F+12R with SuperShuttle
  • Spool valve and telescopic stabilizer included in the published feature list

What to watch

  • Engine rating is not PTO power
  • Do not infer a lift upgrade over 246
  • Wide indicative price range needs a configuration-specific quote

What farmers use it for

Best for: Buyers comparing 46 and 50 HP DYNATRACK packages against a verified implement power requirement.

Massey Ferguson 254 DYNATRACK 2WD Full specifications

Engine

Engine HP50 HP
Engine capacity2,700 cc
Cylinders3
Fuel tank55 litres

Transmission · Brakes & steering

Gearbox12 Forward + 12 Reverse
Transmission typeConstant mesh
BrakesOil-immersed brakes
SteeringPower steering
Drive2WD

Dimensions & weight · Wheels & tyres

Weight2,070 kg
Front tyre6 x 16
Rear tyre14.9 x 28

Massey Ferguson 254 DYNATRACK 2WD vs Direct rivals

Similar models — 41–50 HP

View all 41–50 HP →

Other Massey Ferguson models

Massey Ferguson — All models →

Owner reviews

No owner reviews yet. If you own this machine, yours will be the first.

Write a review

Massey Ferguson 254 DYNATRACK 2WD — Frequently asked questions

Is the 254 DYNATRACK 2WD the same as its 4WD version?

No. This card uses the official 2WD page. Keep the 4WD axle, tyres and price separate.

Does 50 HP mean more lift than the 246?

Do not assume it. Both cited pages list 2050 kgf; confirm the applicable rating conditions and approved attachment for the delivered machine.

Is the spool valve enough to approve a hydraulic implement?

No. Match the implement’s pressure, flow, connection and control requirements with the supplier.

Sources: masseyfergusonindia.com tractorkarvan.com

Specifications are compiled from manufacturer literature and Indian dealer sources. Prices are ex-showroom and change often — verify before buying.