Harvester · Above 60 HP

New Holland TC5.30 Price September 2026

New Holland TC5.30
₹ 29.51 Lakh – ₹ 34.51 Lakhex-showroom
138 HPEngine HP
5,900 ccEngine capacity

A 15 ft cutter bar, a 4.57 metre header and a 3,000 litre grain tank put the New Holland TC5.30 above everything else in this batch on sheer capacity. Power comes from a 5.9 litre Tier-3 engine rated at 102 kW, or 138 HP, at just 1800 rpm, which is a low working speed for that output and means the engine is loafing where an Indian-built 101 HP machine would be near its ceiling. The knife runs 1150 cuts a minute into a 1300 by 607 mm threshing drum, five straw walkers give 4.5 to 5.3 square metres of separation, and a rotary separator is available on top of that. Unloading runs at 50 litres a second. Transmission is a 4F+1R mechanical box good for 25 km/h on the road. Price is ₹29.51 lakh to ₹34.51 lakh.

Aglist Score: 6.3/10 — Average

6.3/10
Average
Value for money 7.4
Power & performance 4.7
Warranty & service reach 7.0

How we score →

Our verdict: New Holland TC5.30

Verdict by the Aglist editorial desk

The number that matters here is 1800 rpm. Making 138 HP at that engine speed rather than at 2200 rpm is what lets this machine hold header speed through a thick, damp patch instead of bogging and forcing the driver to slow down, and over a full day that is where the extra acres come from. The 50 litre per second unloading rate and the 3,000 litre tank are built around keeping the header cutting while the trolley catches up. Six declared crops give you work outside the wheat and paddy windows. Against that, understand what you are signing up for. ₹29.51 lakh at entry is ₹6 lakh above the base Kartar 4000 and Dasmesh 9100, and running an imported-brand machine in a district where the nearest authorised service point is two hours away has a cost that does not appear on the invoice. The transmission is a 4F+1R mechanical box, which is fine but is not the hydrostatic control a track machine gives you in mud. This is a machine for an operator with the acreage to keep it busy and the cash flow to survive a slow parts week.

New Holland TC5.30 — What works / What to watch

What works

  • 138 HP delivered at just 1800 rpm holds header speed through thick, damp crop
  • 15 ft cutter bar and 4.57 m header, the widest cut in this batch
  • 3,000 litre grain tank with 50 litre/second unloading keeps the header moving
  • Six declared crops, from wheat and paddy to soybean, sunflower and barley
  • 4.5 to 5.3 m2 of straw walker separation, with an optional rotary separator

What to watch

  • Entry price of ₹29.51 lakh is about ₹6 lakh over the base Kartar 4000 and Dasmesh 9100
  • Service and parts depend on an authorised network that is thin in many harvesting districts
  • 300 litre fuel tank is smaller than the Kartar 4000's 380 litres despite the bigger engine
  • Mechanical 4F+1R transmission gives less fine control in soft ground than a hydrostatic drive

What farmers use it for

Best for: Premium contractors and large commercial farms with the acreage to keep a 15 ft header working every day of the window.

Large commercial farms and premium custom-hiring operators; multi-crop work across wheat, paddy, soybean and maize belts

New Holland TC5.30 Features

New Holland TC5.30 Full specifications

Engine

Engine HP138 HP
Engine capacity5,900 cc
Machine typeself-propelled combine

Transmission · Brakes & steering

Drivewheel

Hydraulics & PTO

Cutter bar width15
Grain tank3000 litres
Suitable cropswheat, paddy, maize, soybean, sunflower, barley

New Holland TC5.30 On-road price 2026

The ex-showroom price is the same everywhere; the on-road price is not. Open the breakdown for your state.

Uttar PradeshMadhya PradeshRajasthanMaharashtraPunjabHaryanaBiharGujaratKarnatakaAndhra PradeshTelanganaWest BengalTamil NaduOdishaChhattisgarhJharkhand

New Holland TC5.30 EMI calculator

—Monthly EMI
—Total interest
—Total payable

As of August 2026 tractor loans run around 9–12% at public sector banks and higher at NBFCs. Your actual rate depends on your lender and your file.

Similar models — Above 60 HP

View all Above 60 HP →

Other New Holland models

New Holland 41–50 HP 2

New Holland — All models →

Browse by price: ₹ 29.51 Lakh bracket

Owner reviews

No owner reviews yet. If you own this machine, yours will be the first.

Write a review

New Holland TC5.30 — Frequently asked questions

What is the price of the New Holland TC5.30?

The listed range is ₹29.51 lakh to ₹34.51 lakh, depending on specification and dealer. Even the entry figure is around ₹6 lakh above the base price of the 101 HP Indian machines in the same catalogue, so the case for it rests on daily output and on multi-crop work.

How many HP is the New Holland TC5.30?

It is rated at 102 kW, which is 138 HP maximum, from a 5.9 litre Tier-3 engine at 1800 rpm. The low rated speed matters as much as the number. Producing that output without spinning to 2200 rpm means more reserve when the crop suddenly thickens and the drum load jumps.

What crops can the New Holland TC5.30 harvest?

Six are declared: wheat, paddy, maize, soybean, sunflower and barley. For a contractor that spread is the commercial argument, because a machine that only cuts wheat and paddy earns in two short windows a year while a multi-crop machine can pick up soybean and sunflower work in between.

What is the mileage of the New Holland TC5.30?

We do not publish diesel consumption figures we cannot source. The fuel tank holds 300 litres, which is smaller than the 380 litres on the Kartar 4000 even though the engine is bigger, so plan refuelling accordingly. Actual burn depends on crop density, straw moisture, drum load and how far you travel between plots.

Sources: www.tractorjunction.com www.indiamart.com

Specifications are compiled from manufacturer literature and Indian dealer sources. Prices are ex-showroom and change often — verify before buying.